SKF TMEB 2 Instrucciones De Uso página 13

Step 2. Elimination of horizontal angle misalignment.
Move the machine until the laser line is positioned equidistantly from
the three reference lines, the top reference line and the two bottom
reference lines (as per figure 13).
Fig. 11. Pulleys with combined
horizontal angle and
parallel misalignments
Step 3. Elimination of parallel misalignment.
Move one of the pulleys on its shaft until the laser line exactly
matches the three reference lines (as per figure 15).
Fig. 13. Pulleys with parallel
misalignment
SKF TMEB 2
Fig. 12. Horizontal angle alignment
Fig. 14. Parallel alignment
Belt alignment tool
13