Determining The Type Of Misalignment - SKF TMEB 2 Instrucciones De Uso

3.4

Determining the type of misalignment

The laser line emitted from the laser unit will now appear on the
receiver unit. The pattern will vary depending on the type of
misalignment, as shown in figure 5, 6, 7 and 8.
Fig. 5. Display of vertical angle
misalignment
Fig. 7. Display of parallel
misalignment
SKF TMEB 2
Fig. 6. Display of horizontal
angle misalignment
Fig. 8. Display of all three
misalignments combined
Belt alignment tool
11