Entering The Overload Value For Watts (W) - GT -PM-04 Instrucciones De Uso

Entering the overload value for watts (W)

1. After entering the value for the green-
house gas emissions push the button
SET / OK.
2. The overload value W or A will blink on
the display.
3. You can switch to W with the button
VALUE / + or DISPLAY / -.
4. Push the button HISTORY. The first
digit will blink on the display. You can
enter the desired number with the but-
tons VALUE / + or DISPLAY / -.
5. Push the button HISTORY to switch to
the subsequent (second) number. You
can enter the desired number with the
buttons VALUE / + or DISPLAY / -.
6. Enter the other numbers as described
in steps 4 and 5 until you have set the
desired value.
7. After entering the last digit, push the
button HISTORY.
106