•
TOTAL TIME (total measurement time)
The time is measured as long as a
consumer is connected. Seconds are
shown up to 99:59:59 hh:mm:ss. No
more seconds are shown from 100
hours and more. Maximum display of
up to 9,999:59 hhhh:mm.
•
TOTAL COST (costs for the total mea-
surement time)
The total costs for the power consump-
tion are displayed. The consumption for
night-time current is also considered (if
entered).
•
GHG (greenhouse gas emissions CO2
in kg)
Setting a specific measured value)
1.
Abort cycle mode with the button
VALUE / +.
2.
Select a desired value by repeatedly
pressing the button VALUE / +.
3.
Push the button SET / OK. The dis-
played value remains on the display.
4.
To return to the cycle mode, push the
button VALUE / +.
110