Before First Use - Korona 81502 Manual De Instrucciones

Normal: The fan runs according to the set speed setting (Low – Medium - High)
Natural: The fan runs according to a pre-determined program which varies according to which speed is
selected. This setting will enable you to enjoy a nice, natural breeze.
Sleep: The fan runs according to a pre-determined program; the fan will gradually slow down and remain
at low setting.
Before first use of the remote control, remove the protective sheet from the button cell.

BeFORe FIRST uSe

• Remove all packaging material and check whether the appliance is complete and that all accessories are
included.
• Fully unwind the power cord.
• Clean the appliance as described under Cleaning and Care.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away to avoid
suffocation.
Assembly
1. Turn the two parts of the base upside down and attach part 1 to part 2 by aligning the holes onto the
posts. Make sure that the two base parts are securely attached.
2. Pass the power cord through the center hole of the base.
Align the base and insert the fan body into the wholes of the top of the base, turn it anti clockwise and
make sure that it is securely attached.
In addition, to fully secure the fan body to the base, insert the two screws into the holes of the base and
tighten them.
3. Fasten the cord to the base by running it through the cable guide.
Instruction Manual
ENGLISH
19