Hardware Installation; Mounting The Camera - D-Link DCS-7110 Guía De Instalación Rápida

Mounting the Camera

Step1: Using the two screws provided attach camera shoe to
the underside of the camera.
Step2: Using the bolt provided attach camera shoe to the
mounting bracket and adjust the vertical orientation of
the camera.
Step3: Using the Allen Wrench provided, loosen the bolts and
adjust the vertical / horizontal orientation of the camera
to desired field of view. Firmly tighten the adjustment
bolts and lock it into the place.
Deploying the Camera
Step1: Locate an area on the wall which is capable of
supporting the weight of the camera.
Step2: Use a drill bit to make holes. Insert wall anchors
and affix the mounting bracket using the screws
provided.
Step3: The camera cables can be installed through a
separate large hole drilled in the wall, or using an
external cable conduit.
D-Link DCS-7110 Quick Installation Guide

3. Hardware Installation

5