Chauvet DJ Intimidator Barrel LED 300 Guia De Inicio Rapido página 2

Intimidator™ Barrel LED 300 QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
To Begin
The Intimidator™ Barrel LED 300 Quick Reference Guide (QRG) has basic
product information such as mounting, menu options, and DMX values. Download
the User Manual from
The information and specifications contained in this QRG are subject to change
without notice.
These Safety Notes include important safety information about installation, usage,
and maintenance.
•
This product is not intended for permanent installation.
•
ONLY connect this product to a grounded and protected circuit.
•
Always disconnect from power before cleaning or replacing the fuse.
•
DO NOT look at the light source when the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect this product from power cord by pulling or tugging on the
cord.
•
When mounting this product overhead, use a safety cable.
•
DO NOT allow flammable materials close to the unit while operating.
•
DO NOT touch this product when it is operating because it may be hot.
•
The voltage of the outlet to which you are connecting this product must be
within the range stated on the decal or rear panel of the product.
•
This product is for indoor use only! (IP20) To prevent risk of fire or shock,
do not expose this product to rain or moisture.
•
Always mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the unit's housing are blocked.
•
Never connect this product to a dimmer or rheostat.
•
Replace the fuse with the same type and rating.
•
ONLY use the hanging/mounting bracket or the handles to carry this product.
•
The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
•
In the event of a serious operating problem, stop using immediately.
•
DO NOT open this product. It contains no user-serviceable parts.
Outside the U.S., UK, or Ireland, contact your distributor to request support or
return a product. Visit
• One Intimidator™ Barrel LED 300
• One Power Cord
Unpack your Intimidator™ Barrel LED 300 and make sure you have received all
parts in good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
www.chauvetlighting.com
www.chauvetlighting.com
• One Warranty Card
• One Quick Reference Guide
Page 2 of 72
for more details.
for contact information.
EN