Tecatel CENT-TACPLUS II Manual De Usuario página 33

Copy from Memory Stick model STICK-TACPLUS (optional).
- Connect the Memory Stick to the unit.
- Then connect the mains to the unit.
- Push on the rotary button for more than 3 seconds to enter into programming mode (see page 22).
- Turn the button to select the Data Import mode.
- Push the rotary button to enter the selected mode.
3 sec.
- Push the rotary button to confirm Data Import.
Data
Tecatel
TAC PLUS PC
Memor y
Posi tion
Oran ge: Standby
Green: Impor t OK
Red: Import error
D ata I mpor t
The software version is displayed,
followed by a dot.
3 sec.
Data Import
The LED is green.
Data Import
The LED is now RED colored.
AL is displayed
A dot is displayed.
33
Tecatel