EN
Fan Starter
1
2
3
3.1
3.2
8
Preface
Read this manual carefully before installation, use and service of this product.
Replace the manual immediately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EU directives.
To maintain this status, all installation, maintenance and repair is to be done by
qualified personnel using only Nederman original spare parts and accessories.
Contact the nearest authorized distributor or Nederman for advice on technical
service and obtaining spare parts. If there are any damaged or missing parts
when the product is delivered, notify the carrier and the local Nederman
representative immediately.
Safety
This document contains important information that is presented either as a
warning, caution or note:
WARNING!
Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel, and
how that hazard may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE
! Notes contain other information that is important for personnel.
Description
Intended use
•
Fan Starter 5.5 is a direct starter for Nederman NCF Fans.
•
Fan Starter 5.5 PTC is a direct starter for Nederman NCF EX Fans.
•
Fan Starters 11/18.5/22 are Y/D starters for Nederman NCF Fans.
•
Fan Starters 11/18.5/22 PTC are Y/D starters for Nederman NCF EX
Fans.
NOTE!
Y/D starting reduces the start current 3 times compared with a direct
start.
Function
The Fan Starter is fitted with a 4-pole red and yellow main switch, which is
interlocked with the door so that the door can not be opened if the main switch
is on. Control voltage is 24 V AC supplied by an internal transformer.
NOTE!
The red and yellow main switch is also used as an emergency stop
switch.