Twin-Star International 18DM9038 Manual De Instrucciones Adjunto página 7

5. Insert one Wood Dowel (CC) and Screw (A-1) into
each of the pre-drilled holes in the underside of
Mantel/Top (G) and lay fi nished side up on top of
completed assembly. From the inside, attach the
Mantel use a Phillips head screwdriver to tighten
(A-2).
Hardware Used
Camlock
AA
(A-1,A-2)
Wood Dowel
CC
6. Remove the two mounting brackets attached to the
back of the Left and Right Front panels. Set aside
with the wood screws.
PLEASE READ ALL "ELECTRIC FIREPLACE
INSERT" INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT IN
YOUR FIREPLACE CLOSE TO ITS FINAL
POSITION.
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across Hearth/Base (A) as it may scratch your unit.
Install the mounting brackets to hold insert fl ush
against the inside of the mantel front panel.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO MOVE
COMPLETED UNIT INTO ITS FINAL POSITION.
Fig. 5
x 4
x 4
Fig. 6
Completed
Unit
6
CC
A-1
A-2
G
Install
Insert
From
Back
Electric
Fireplace Insert