What to avoid
13. Installation, environmental conditions, first cleaning
WARNING!
Before carrying out any operation take all possible precautions to prevent injury to the
operator, use the individual Personal Protection Equipment provided
Installation is reserved to technicians trained and authorized by the body specified in the
contract (manufacturer/dealer/distributor)
i
- It is the responsibility of the customer to provide the installation area
- Changes to the setup described here must be authorized by ARNEG S.p.A.
The cabinet can be delivered packed as follows:
• with frame in wood fixed to the base and nylon casing blocked by straps (standard) (Fig.4).
• with a cardboard casing (on request) (Fig.5)
• with wooden crate (on request) (Fig.6)
The installation
• comply with the local standards in force
• comply with the environmental climatic class 9
area should
• have a floor able to support the weight of the cabinet
• a switch with automatic protection against short circuits, ground discharges
• provide the space required for correct ventilation, use and maintenance
Conditions
For the cabinet to work properly, the room temperature and relative humidity
must not exceed the limits of a climate class 3 (+25°C; R.H. 60%) according to
environmental
t h e s t a n d a r d E N -I S O 23 9 53 - 2.
Cabinet delivery • make sure the packing is intact and that it does not display readily apparent
• carefully perform the unpacking operation in order not to damage the cabi-
• check that cabinet components are intact
• should you notice any damage immediately inform the manufacturer
05060165 00 15-04-2016
B e l g r a d o 2 - L o n d o n 3
UV rays. Permanent deformation of plastic materials /damage of cabi-
n e t p a r t s .
DO NOT store the cabinets in uncovered areas exposed to atmospheric
agents and to direct sunlight.
and dispersions between the electric power line and the machine;
damages;
net;
V D L -V D A -S E L F -8 3 -H 125-H 150
E n g l i s h
43