Forno DSP-IND-1CG-DCL-30 Manual Del Usuario página 16

VI.Counter Installation Instructions:
Before installing the cooktop:
1. Visually inspect the cooktop for damage.
Also make sure all cooktop screws are on
tight.
2. Place the cooktop into the countertop
cutout.
Model and Serial Number Location:
The serial plate is located under the cooktop.
When ordering parts or making inquiries about
your cooktop, be sure to include the model and
serial numbers.
Connecting to a 3 wires power supply cable electrical system
1. Disconnect the power supply.
2. In the circuit breaker,fuse box,or junction box,connect appliance and power
supply cable wires as shown below.
White Wire
Green Wire
(Grounding)
Cable from appliance
Cable from Power Supply
Continues on next page
14
Black Wire
Junction Box