How To Use; Readiness Mode; Switching On The Hob And Cooking Zones; While In Cooking - Forno DSP-IND-1CG-DCL-30 Manual Del Usuario

III. How to Use
Suitable for induction cooktop

Readiness Mode

While on standby mode, press the main
induction hob will make a "beep" sound once
indicating that it is ready to use. If only the indicator
light above the
automatically return to standby mode if the Cooking
zone ON/OFF key or Lock key are not chosen within
30 seconds.

Switching on the hob and cooking zones

Place a compatible pot or pan on the cooking zone you
wish to use.
With the hob being ON as mentioned above, press the
desired cooking zone
and show a "0".
1
Press either the "+" key, "-" key,
cooking level. The cooking zone will automatically turn
9
on standby mode if a key is not pressed within 30
seconds.
Press the minus key (-) to lower the cooking level.
P
Press the Plus key (+) to raise the cooking level.
Pressing the "Boost" key will show on the display as a
"Boost", boosting the heating power to the highest level.

While in cooking

press"
light blink.

While in stop cooking

press"
light blink.
light turn off, cooking zone will turn on standby mode if
don't press"
" " key is lit up, the unit will
ON/OFF key
"key,all cooking zone stop cooking and "
"key,all cooking zone being used, and "
"within 10 minutes.
7
" " key, the
. The display will blink
"Boost" key, to select a
"
"