A Personal Audio Neckloop; Troubleshooting Guide - ClearSounds CLA7 Manual Del Usuario

Using your CLA7 as a
Personal Audio Neckloop
Your ClearSounds CLA7 can be
easily used as a 3.5mm ampli-
fied Audio Neckloop, using the
provided 2.5mm to 3.5mm
adapter. Simply plug the 2.5mm
end of the ClearSounds CLA7
into the 3.5mm adapter, and
then insert the adapter into your
audio jack equipped telephone,
Ipod, CD player, or any device
that has an 8-16 Ohm audio
output through a 3.5mm jack.
Follow the directions on adjust-
ing the volume.

Troubleshooting Guide

No Sound
1. Battery may be dead.
2. Battery may be in backwards.
3. Verify that the CLA7 is turned on.
4. Verify that the phone is turned on.
5. Check if the plug of the CLA7 is plugged all the way
in.
10