Replacing The Dvd Player - Insignia NS-LTDVD26 Guía Del Usario

Replacing the DVD player

DVD cover
DVD player
To remove the old DVD player:
1 Turn off your TV combo, then unplug the
power cord.
2 Place cushioning, such as a towel, on a flat
surface, then place your TV combo
face-down on the cushioning.
Caution
Your TV combo's screen can be easily damaged.
Make sure that you place cushioning between the
screen and the surface you are using as your work
area.
3 Remove the two screws (1).
4 Slide the DVD cover in the direction of the
arrow (A).
5 Remove the four screws (2).
6 Disconnect the DVD player from the TV as
shown in the illustration.
7 Remove the DVD player.
24
Insignia NS-LTDVD26 26" LCD TV/DVD Combo
1
1
D
2
2
2
2
B
C
To install the new DVD player:
1 Insert the new DVD player in the direction of
the arrow (C).
2 Reconnect the DVD player to the TV as
shown in the illustration.
3 Replace the four screws (2).
4 Slide the DVD cover onto the DVD player in
the direction of the arrow (D).
5 Replace the two screws (1).
www.insignia-products.com
A
1
--ST3×12
2 --ST3×8
Disconnect cable