I Cleaning The Propeller - Zodiac TornaX Manual De Instalación Y De Uso

4.2 I Cleaning the propeller

To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when handling the propeller
• Remove the fi lter using the handle (see image
• Remove the external fl ow guide by lift ing it so as to clear the clips (see image
• Upon fi rst removal, you will noti ce that the internal fl ow guide is securely ti ghtened, which is why we recommend inserti ng Upon fi rst removal, you will noti ce that the internal fl ow guide is securely ti ghtened, which is why we recommend inserti ng
a screwdriver into the holes to loosen it by turning the screwdriver in the anti -clockwise directi on (see image a screwdriver into the holes to loosen it by turning the screwdriver in the anti -clockwise directi on (see image
• Once the internal fl ow guide has been loosened, unscrew it by hand (see image Once the internal fl ow guide has been loosened, unscrew it by hand (see image
• Remove the internal fl ow guide (see image
• Put on a pair of gloves and pull the propeller, holding it fi rmly to take it out (see image
• Remove any debris (leaves, stones, etc.) which may be blocking the propeller (see image
11
.
).
).
).
).
).
). ).
).