I User Alerts - Zodiac TornaX Manual De Instalación Y De Uso

5.2 I User alerts

Flashing LED:
Tip: if you require assistance, inform your retailer about the appliance's conditi on to save ti me
Provide this informati on to your retailer
15
• Check that the cleaner is correctly connected to the control box.
If necessary, unplug it and reconnect it following the appropriate
procedure.
• Check that there is nothing preventi ng the brush and support from
turning. To do so, remove the tracks and manually rotate the wheels to
check that there are no external elements jammed in a housing.
• Cleaner operati ng outside the pool. Make sure you start the cleaner
when it is in the water (see § "3.3 Immersing the cleaner").
• Check that there are no stones or hair in the propeller (see § "4.2 I
Cleaning the propeller").
• Clean or change the fi lter if necessary.
• Temperature too high in the control box:
- Preferably install the box in a shaded locati on.
- Allow the box to cool before starti ng a new cycle.
• General cleaner surge current. Check the soluti ons for fl ashing indicators
No. 2 and No. 3.
• The cleaner may be stuck in one area of the pool. Re-start a cycle or
check the soluti ons for the fl ashing indicator No. 2.
Soluti ons