Package Contents; Hardware Installation - D-Link DCS-3110 Guía De Instalación Rápida

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-3110
Megapixel PoE
Network
Camera

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located on
the Internet Camera's back panel and attach it to the network.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter,
the Power LED on the DCS-3110 will turn green to indicate a proper
connection.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Network Camera's back panel (labeled DC 12V) and
connect the other end to an AC power outlet.
Note: The LED on the network camera will turn green, when you have
a proper connection,. The light may go on and off and your computer
may show an intermittent loss of connectivity, this is normal until you
have configured your Network Camera.
DCS-3110
Megapixel PoE Network Camera
CD-ROM with
Manual and
Setup Wizard
CAT5 Ethernet
Cable
2
Power Adapter Camera Stand