auna Wallie 10033227 Manual De Instrucciones página 39

Preset radio stations
1. Press the STANDBY button (2) on main unit or (1) on remote control
to turn on the unit.
2. Tap the FUNCTION button (4) on main unit or the MODE button (7) on
remote control to select FM radio mode.
3. Tune to the desired radio station either by using either the "manually"
or "automatically" tuning method.
4. Tap the MEM. button (3) on remote control to turn on the unit. The next
available preset memory number will flash on the LCD DISPLAY (10).
(Note: "P01" will blink on the display if you are programming preset for
the first time.)
5. Tap the buttons PRESET+ (12) or PRESET- (5) on the remote control to
select the preset number you want to assign the station to.
6. Tap the MEM. button (3) on the remote control to confirm the setting.
7. Repeat above steps 3 - 6 to preset up to 30 FM stations.
Recalling preset memory channels
• In radio mode, recall the preset channels by pressing the buttons
PRESET+ (12) or PRESET- (5) on the remote control repeatedly.
EN
39