Assembly - Bissell TOTAL FLOORS 63X4 Serie Guia Del Usuario

Assembly

1.
Insert flexible hose by inserting it into
the suction opening on the canister. To
disconnect press the release buttons and
pull the hose connector out of the hose
connection opening.
2. Connect telescoping extension wand to
the handle end of the flex hose.
3.
Connect floor nozzle to the end of the
telescoping extension wand.
4.
Once assembled, you can store your
vacuum in one of two positions:
A. Storing in the in-use position:
To store with the floor nozzle
attached, insert the storage clip
(located on the back of the floor
nozzle) into the storage slot on the
rear of the vacuum.
B.
Storing in the upright position:
To store with the floor nozzle attached,
stand the vacuum in the upright
position and insert the storage clip
(located on the back of the floor
nozzle) into the storage slot on the
bottom of the vacuum.
WARNING:
Plastic packaging can be
dangerous. To avoid danger of
suffocation, keep away from
babies and children.
w w w . b i s s e l l . c a
2.
1.
3.
A. Storing in the in-use position
B.
Storing in the upright position
1 - 8 0 0 - 2 6 3 - 2 5 3 5
7