Velleman CAMSETW14 Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Restrictions
5.
DO NOT use this product to violate privacy laws or perform other illegal activities.
DO NOT use this product near medical equipment e.g. pacemakers. Keep at least 0.5m
clearance as radio waves might influence medical devices.
Features
6.
• built-in microphone for audio monitoring
• 4 channels adjustable by setting dipswitches
• manual and automatic channel scan
• transmitting range (depending on the surroundings): ±100 m without obstacles
• content:
1x camera + mounting hardware + foam base
1x receiver + antenna + stand
1x AV cable
2x voltage adapter
1x lens adjuster tool + channel pick tool
1x 9V battery clip
1x user manual
Overview
7.
Mounting
8.
Camera
The camera can be mounted against the wall or the ceiling using the universal bracket (5)
with either the included mounting plate or the foam base.
When mounted on the ceiling, the universal bracket must be placed on the top of the
camera (closest to antenna (1)). To do this, turn the camera part of the universal bracket
(5b) 90° counter clockwise and pull gently. Remove the rubber protection cap from the
top and place it on the bottom. Install the universal bracket (5b) by inserting it and
turning 90°clockwise.
Note that the mounting plate and foam base cannot be used together. For ceiling
mounting, avoid using the foam base.
Receiver
The receiver can be used either horizontally or vertically.
When used vertically, the included stand can be used.
00 (12/08/2008)
CAMSETW14
1. Antenna
2. Lens
3. Channel switch cover
4. Microphone
5. Universal bracket
6. DC power jack
7. Mode control switch
8. DC power jack
9. AV output jack
10. Antenna
11. Channel indicator
12. Channel select/mode switch
4
a. mounting part
b. camera part

Publicidad

Tabla de contenido
loading

Tabla de contenido