Temperature Setting; Time Setting - Blyss NE10FB Manual De Usuario

II. Temperature setting
1. Under the mode of comfort mode or Eco mode (excluding anti-freezing mode),
press or to choose the desired temperature. The temperature difference
between mode ECO and mode comfort is 3.5°C, so the temperature of mode ECO is
between 1.5°C and 25.5°C.
2. Press other buttons except
automatically save.
When the room temperature is higher than the selected temperature, the heater will
stop heating.
III. Time setting
Note:
Press the to set the hour/minute/week.
The time and day of the week remain valid as long as the power supply is not cut off.
The setting "day of the week" and "Time" applies to all programs (see Section IV, P1 /
P2 / P3 / Personalized).
1. Press and
2. Continue to press
3. Press the to set the hour/minute/week.
Day of the week
/
at the same time to start the time setting.
to toggle among hour/minute/week.
Time
to finish the setting, or after 5 seconds it will
Selection
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Hour
Minute
EN
Quick start
Displayed icon
1
2
3
4
5
6
7
00-23
0 0-59
13