Blyss NE10FB Manual De Usuario página 16

Quick start
VI: Window detector function
Press button to enter window detector function. The appliance will enter comfort
mode as default. If temperature decrease detected, the appliance will automatically enter
anti-freeze mode. If temperature rise up, the appliance will go back to comfort mode.
You can press M or PRG button to choose other modes, or press standby button to
enter standby mode.
REMARKS: under window function, pilot control is not available.
VII: Backlight
The backlight is automatically turned off:
1. 60 seconds after the keyboard lock
The backlight is reactivated when the system unlocked.
2 60 seconds after the last use of the front keys.
The backlight reactivates after a key has been activated.
VIII: Validity of settings
All the above settings for temperature, time, the date of week and the programs
remain valid until the electric power is not cut.
In case of power failure, the device keeps in memory only the parameters,
temperature and operating mode. When power is restored, the clock must be set
again to operate the various programs correctly P1 / P2 / P3 / personalized.
Lock the keyboard after making your settings to avoid any setting is deactivated
inadvertently by the engagement of a key.
EN 16