Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
• Loading a cassette in this product. (Refer to page 7.)
1. Select the desired source (e.g. Tuner).
Each press changes the Source ...
Each press of the SOURCE/OFF button selects the desired source in the following order:
Tape = Tuner
Note:
• The cassette player will not change when no tape is set in this product.
• When this product's blue/white lead is connected to the car's Auto-antenna relay control terminal,
the car's Auto-antenna extends when this product's source is switched ON. To retract the antenna,
switch the source OFF.
2. Raise or lower the volume.
3. Turn the source OFF.
Hold for 1 second
5