Canceling Traffic Announcements; Adjusting The Ta Volume; Tp Alarm Function - Pioneer KEH-3930R Manual Del Usuario

Using RDS Functions

Canceling Traffic Announcements

• Press the TA/AF button while a traffic announcement is being received to
cancel the announcement and return to the original source.
The announcement is canceled but the tuner remains in the TA mode until the TA/AF
button is pressed again.

Adjusting the TA Volume

When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
• Set the volume by adjusting it during reception of a traffic announcement.
The newly set volume is stored in memory and recalled for subsequent traffic announce-
ments.

TP Alarm Function

About 30 seconds after the "TP" indicator is extinguished due to a weak signal, a 5 second
beep sounds to remind you to select another TP or EON TP station.
• If you are listening to the tuner, tune in another TP station or EON TP
station.
In sources other than tuner, the tuner automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)* seconds after "TP" disappears from the
display.
* Time taken before Seek begins.
TA function ON
TA, AF functions ON
13
10 seconds
30 seconds