Programming Tags; Master Tag; User Tag - SOMFY Premium VSYSTEMPRO Manual De Instalación

3.1 Master tag

The external module with 1 or 2 call buttons is supplied with a master tag and at least
two user tags.
The master tag is programmed in-factory, it is black to easily stand out. This tag enables
user tags to be programmed or cleared.
If the master tag is lost, a new one will have to be ordered and a specific procedure
performed to program it on the external module. In this instance, it will be necessary to
reprogram all the user tags.

3.2 User tag

The user tags can be programmed on the external module using the master tag to access
programming mode:
[1]. Place the master tag in front of the tag reader.
Le module extérieur émet deux «bip» aigus.
[2]. Press the call button (the lower call button in the case of a 2-button external
module)
The external module emits a low-pitched continuous "beeping"
sound.
[3]. Release the call button.
The low-pitched "beeping" sound stops.
[4]. Place the user tag to be programmed in front of the tag reader.
The external module emits a high-pitched "beeping" sound, the tag is
programmed.
[5]. Place, one at a time, all the tags to be programmed in front of the reader.
The external module emits a high-pitched "beeping" sound for each
tag programmed.
Note: the external module emits three low-pitched "beeping" sounds if an
already programmed tag is placed in front of the tag reader.
Note:The external module emits three high-pitched "beeping" sounds to
indicate that its memory is full (50 tags maximum). In this instance, it is not
possible to program new tags.

3 PROGRAMMING TAGS

Copyright © 2016 Somfy SAS. All rights
reserved.
EN
BIP BIP
BIIIIIP
BIP
BIP
BIP BIP BIP
BIP BIP BIP
3