CLEANING AND CARE
Drainage Instructions
Manual drainage
1. When the machine stops after the water is full,
turn off the machine power and unplug the
power plug.
2. Place the water container below the side water
outlet behind the body.
3. Unscrew the drainage cover and unplug the
water plug, the water will automatically fl ow into
the water container. Keep the drainage cover
and the water plug properly.
4. During drainage, the body can be tilted slightly
backwards.
5. When the water is discharged, stuff the water
plug, and tighten the drainage cover.
Note: Please move the machine carefully, so as not
to spill the water in the water pan at the bottom of the
body. Restart the machine after the water plug and
drainage cover are installed, otherwise condensate
water of the machine will fl ow to the fl oor or the
carpet.
Continuous drainage (only applicable to cooling and dehumidifi cation mode)
1. Unscrew the drainage cover, and unplug the water plug.
2. Set the drainage pipe into the water outlet.
3. Connect the drainage pipe to the bucket.
Cleaning
DANGER
Risk of electric shock
Before cleaning and maintenance, turn off the machine and unplug the
plug.
Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will be
damaged or even the whole machine will be damaged.
EN
27