Initial Operation - Bosch GCC 30 TrackTag Professional Manual Original

OBJ_BUCH-2515-001.book Page 22 Friday, July 17, 2015 10:30 AM
22 | English
– To insert or change the battery 5, follow the illustrations on the graphics pages.
Observe the following advice when doing so.

Initial Operation

(see figures B1 – B3)
Battery Replacement
(see figures C1–C6)
Only remove used batteries using your fingers.
Insert the battery into the battery compartment with the plus terminal facing up-
wards. The angle of the battery may vary depending on the system. It is not necessary
to push in the battery.
Before closing the battery lid 1, ensure that the gasket was not damaged when the
battery compartment was opened.
Initial Operation
Note: First, fully complete the tutorial for the app/web-based application. This will
provide you with a better overview of the procedure for creating the inventory.
Once the battery 5 has been inserted, the GCC 30 TrackTag Professional will send
out a continuous signal. The Bluetooth® signal will only be interrupted if the battery is
drained or faulty or if it is removed.
You can find further information directly in the app/web-based application from
Bosch.
Attaching the GCC 30 TrackTag Professional
 Observe the safety information and processing instructions provided with
the two-part adhesive.
– Thoroughly mix both parts of the two-part adhesive 6 together.
– Immediately apply the mixed adhesive to the underside of the
GCC 30 TrackTag Professional as a thin film or in the form of droplets.
– Adjust the bonding surface to precisely match the shape of the
GCC 30 TrackTag Professional within the specified processing time.
Note: Use enough material to ensure that the surface is completely covered with
adhesive. If the bonding surface is curved, you need to use proportionately more
adhesive to ensure that the joint is as large as possible.
– Establish firm contact between the GCC 30 TrackTag Professional and the surface
of the object that is to be bonded. Ensure that the bonded parts are not moved un-
til they have been completely fixed.
1 609 92A 19K | (17.7.15) Bosch Power Tools