Product Description And Specifications; Intended Use - Bosch GCC 30 TrackTag Professional Manual Original

OBJ_BUCH-2515-001.book Page 18 Friday, July 17, 2015 10:30 AM
18 | English
 The following locations are suitable for attaching a GCC 30 TrackTag Professional
(for examples, see image E):
– Surfaces where attaching the GCC 30 TrackTag Professional does not prevent
or complicate the operation of the object,
– Surfaces that are not be exposed by the identified object falling over,
– Surfaces with the minimum possible curvature.
 Only use the two-part adhesive provided and observe all processing instruc-
tions from the manufacturer when attaching to the object. The use of adhe-
sives with a different composition may either cause damage to the object to be
identified or fail to create a permanent bond between the
GCC 30 TrackTag Professional and the object.
 Prepare the bonding surface in accordance with the instructions from the
manufacturer of the two-part adhesive. If the object to be identified is not prop-
erly cleaned before bonding, the material properties could change, potentially
leading to damage.
 Protect any object identified with a GCC 30 TrackTag Professional against
heat. Long-term exposure to sunlight and high temperatures (>70 °C) may cause
damage to the battery.
 Only use batteries listed in this operating manual. Do not use any other button
cells or other forms of electrical power supply.
 Ensure that battery replacement is carried out properly. There is a risk of ex-
plosion.

Product Description and Specifications

The ® word mark and logos are registered trademarks owned by Blue-
tooth SIG, Inc. and any use of such marks by Robert Bosch GmbH is under li-
cense.

Intended Use

The GCC 30 TrackTag Professional enables power tools and other objects to be clear-
ly identified via a Bluetooth® signal.
The GCC 30 TrackTag Professional sends out a continuous radio signal, enabling its
location to be determined or other freely configurable data (such as service intervals)
to be ascertained. Bosch offers an app and a web-based application that is appropri-
ate for this purpose.
1 609 92A 19K | (17.7.15) Bosch Power Tools