Package Contents; Hardware Installation - D-Link DCS-3410 Guía De Instalación Rápida

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-3410
PoE Day&Night
Network Camera

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector located on the Network Camera's
back panel and attach it to the network.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the
DCS-3410 will turn green to indicate a proper connection and power to the unit.
Attach the External Power Supply
Attach the external power supply to the DC power input connector located on the Network
Camera's back panel (labeled DC 12V) and connect it to an AC power outlet.
Note: When you have a proper connection, the LED will turn green. The light may cycle on
and off and your computer may show an intermittent loss of connectivity, this is normal until
you have configured your Network Camera.
If you already connect your device correctly, please refer to the Manual in the CD for
software utility installation step by step. You will install a software and use it to search and
connect the camera.
DCS-3410
PoE Day&Night Network Camera
CD-ROM with Category 5
Manual and Ethernet Cable
Software
Power Adapter
2
Camera Stand