Parts & Assembly; How To Operate - smart RKP530 Retro Serie Instrucciones Y Recetas

PARTS & ASSEMBLY
ASSEMBLY
Your SMART RETRO SERIES™ KETTLE POPCORN MAKER comes fully assembled. Simply
insert the Kettle into brackets and place the Pull Out Tray in the bottom of the unit.
Kernel Measuring Cup
(¼ cup = 2 oz)
Oil Measuring
Spoon (1 Tbsp.)

HOW TO OPERATE

Before first use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
1. First, find a flat surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit.)
3. Plug in the appliance while switch is flipped to OFF position.
4. Make sure Kettle is properly secured in support brackets.
5. Make sure Kettle motor is plugged in.
6. Turn appliance ON by flipping the switch on the top of the machine.
5
Kettle
Pull Out Tray
ON / OFF & Light
Switches
Crank Handle