• Make sure the skin is dry and that no hair interferes with the measurement.
• Do not immerse the thermometer in water.
•
• Always use a clinical thermometer to verify any abnormal temperature measure-
ments.
• Clean the lens area by gently blowing with compressed air and use a damp cotton
bud to wipe the lens. Do not use any solvents to clean the lens.
Measurement Notes
• If the thermometer has been stored in a cold or hot environment, allow it at least
30 minutes to acclimate to room temperature before making measurements.
• To prevent transmissions of disease, avoid direct contact with the skin.
• After heavy exercise always wait at least 10 minutes before taking forehead
temperature readings.
Storage and Maintenance
• Clean the sensor tip after each use. Use a clean cloth or cotton bud that can be
moistened with disinfectant, alcohol or warm water.
• To clean the entire device, please use a soft cloth slightly moistened with a mild
soapy solution.
• Do not use any harsh cleaning products.
• If prolonged storage is intended, you should remove the battery.
• The device must not be stored or used at an excessively high or low temperature
or humidity (see technical data), in sunlight, in association with an electrical cur-
rent or in dusty locations. Otherwise inaccuracies can occur.
(Page 3)
1 LCD display
2 IR sensor
3 "
4 Measurement trigger
5 Handle
6 Battery compartment
66
PC-FT3094 IM 90x126mm
Thermometer Description
Display Description (Page 4)
10 Low battery icon
" button
11 Sound status
12 Measurement unit
13 Body temperature mode
14 Object temperature mode
15 Temperature
" button
12.01.21