Repeat Play; Random Play); Scanning Programs; Setting The Range Of Mp3 File Selection - Alpine XMA-T200RF Manual De Operación

Repeat Play

1
Press the REPEAT button of the Remote Control to
play back repeatedly the file being played.
The file will be played repeatedly.
The RPT ALL mode is selected, the unit repeatedly
plays back all files on the disc selected.
RPT → RPT ALL → (off)
→
Press the REPEAT button of the Remote Control and
select OFF to deactivate the repeat play.
NOTE
When MP3 FLDR and RPT ALL are in "Setting the Range of
MP3 File Selection," files in a folder will be played repeatedly.
M.I.X. (Random Play)
1
Press the M.I.X. button on the Remote Control in the
play or pause mode.
The files on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the M.I.X. button on the
Remote Control to turn off the M.I.X.
NOTE
When MP3 FLDR and M.I.X. are set in "Setting the Range of
MP3 File Selection," files in a folder will be played in random
order. After all the tracks have been played back, play does not
shift to the next Folder.

Scanning Programs

1
Press the SCAN button on the Remote Control to
activate the Scan mode.
The first 10 seconds of each file will be played back in
succession.
To stop scanning, press the SCAN button on the
Remote Control and deactivate the Scan mode.
NOTE
When MP3 FLDR is set in "Setting the Range of MP3 File
Selection," the first 10 seconds of each file in a folder will be
played back in succession.
Setting the Range of MP3 File
Selection
You can set the range of MP3 file selection to "entire
disc contents" or "folder contents only."
1
In the MP3 Changer mode, press the rotary encoder
of the Remote Display to switch to MP3 DISC or MP3
FLDR.
TIPS
You can also set the range in the SETUP mode.
1. Press and hold the SETUP button of the Remote Display or
the Remote Control for at least 2 seconds.
2. Turn the rotary encoder of the Remote Display, or press the
8 or 9 button on the Remote Control to select MP3 DISC or
MP3 FLDR.
3. Press the ( or ) button of the Remote Display, or press
the g or f button of the Remote Control to toggle the
mode between MP3 DISC and MP3 FLDR.
• MP3 DISC : plays all the files on one disc.
• MP3 FLDR : plays files in the selected folder only.
4. Press the SETUP button of the Remote Display or the
Remote Control to set the selected mode.
NOTES
If a changer compatible with MP3 is used, the range of MP3 file
selection applies to REPEAT, M.I.X. and SCAN modes only. In
normal mode, the unit plays all files on a disc even when you set
the range of MP3 selection to "folder contents only."

Playing MP3 Data

You can select either playback only of CD data, or
playback of formatted CD data and MP3 files.
When a disc contains CD or the MP3 file data, playback
starts from the CD data portion of the disc.
1
Press and hold the SETUP button of the Remote
Display or the Remote Control for at least 2 seconds.
2
Turn the rotary encoder of the Remote Display to the
left or the right, or press the 8 or 9 button of the
Remote Control to select "CD-DA."
3
Press the ( or ) button of the Remote Display or
g or f button of the Remote Control to select
"CD-DA" or "CD/MP3."
• CD-DA: Only CD data can be played back.
• CD/MP3: Both CD data and MP3 file tracks can be
played back.
4
When the setting is completed, press the SETUP
button of the Remote Display or the Remote Control to
return to the normal mode.
13
-EN