Fanaway EVO1 LED Manual De Instrucciones página 5

Fanaway EVO1 LED Installation Instructions
1 Mounting bracket x 1
2 Canopy screws x 4
3 Canopy x 1
4 Down rod x 1
5 Bolt x 1
6 Bolt & pin cover x 1
7 Pin x 1
8 Top housing x 1
9 Blades x 4

The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the blade to
the nearest objects or walls.

Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 45kg,
with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.
NOTE: The bracket screws provided are for use with wooden structures only. For structures other than
wood, the appropriate screw type MUST be used.
Angled ceiling Installation
This fan hanging system supports a maximum 18 degree angled ceiling
installation.
4 | P a g e
INSTALLING THE MOUNTING BRACKET
Fig. 3
10 Retraction mechanism x 1
11 Lamp base x 1
12 LED board x 1
13 Lamp shade x 1
14 Wooden screws x 2
15 Plastic anchor x 2
16 Balance tapes x 4
17 Remote x 1 set
18 LED driver x 1
Fig. 2
V 1 . 0