First Use; Checking The Treat Maker And Product Contents; Basic Cleaning; Assembly - Kitchen Living FDM-1301 Manual Del Usuario

First use

Checking the treat maker and product contents

1. Take the treat maker out of the packaging and check whether the treat
maker or the individual parts have any damages. If this is the case, do not
use the treat maker. Contact the manufacturer using the service address
specified on the guarantee card.
2. Check to make sure that all contents have been received (see Fig. A).

Basic cleaning

− Clean all parts of the treat maker before first use as described in the chapter
"Cleaning".

Assembly

CAUTION!
Risk of injury and damage!
Improper handling of the treat maker may damage it and cause
injury.
− Make sure the treat maker is placed on a stable, flat surface.
− Do not connect the treat maker to a socket during
assembly.
− The grinder contains sharp edges. Be very careful when
assembling the treat maker.
1. Place the grinder
2. Place the dispenser
turning to the left (see step 2 in Fig. B).
3. Place the axis of the grinder into the opening of the main unit
mouth of the dispenser facing downwards). Secure it by turning to the left
(see Fig C).
4. Place the presser
The treat maker is now ready for use.
AFTER SALES SUPPORT
USA
866 235 5029
in the filling tube
6
at the front of the filling tube and secure it by
7
1 into the filling tube (see Fig D).
(see step 1 in Fig. B).
2
serviceusa@tempo.org
USA
First use
(with the
3
13