Power Source - LEXIBOOK K8050 Serie Manual De Instrucciones

®
The Bluetooth Sound & Light Tower operates on AC 110-240V, 50/60HZ.
AC operation
1. Unwind the AC power cord to its full length.
2. Connect the plug to the AC mains inlet of the unit, and then the mains plug into
a standard AC socket outlet.
Note: Make sure the AC plug is fully inserted into the socket outlet.
3. To switch the unit off completely, turn off power and volume before withdrawing
the power cord from the wall outlet.
NOTE:
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
• Please disconnect the mains plug from the AC outlet if the appliance is not
going to be used for a long period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
unplug the unit from the mains socket and plug it back in.
TURNING THE DEVICE ON AND OFF
1. Press the STANDBY/MODE button once to turn the unit on.
2. Press and hold STANDBY/MODE for three seconds to turn the unit off.

POWER SOURCE

21