General Functions - LEXIBOOK K8050 Serie Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Volume

1. Turn the volume knob to the right to increase the volume. You may also press

VOL + on the remote.

2. Turn the volume knob to the left to decrease the volume. You may also press

VOL - on the remote.

Note: "L00" is the minimum volume and "L30", the maximum volume.

CAUTION: Too high volume, especially when using headphones, can damage

your hearing. For this reason, please turn the volume down.

Mute

Press the Mute button on the remote to turn off the sound. Press again to turn on

the sound again.

Echo/Pitch

Note: The Echo effect can only be activated when a microphone or guitar is connected.

Press this button repeatedly to choose ECHO (reverberation) for microphone/

guitar or PITCH effect for speaker.

Play/Pause

Press the Play/Pause button to play or pause the music.

1. In Bluetooth

mode, press the Next button to go to the next track.

2. When neither microphone nor guitar is connected, press ECHO/PITCH to

enter pitch effect. Then, press the Next button on the tower repeatedly to

increase the level of pitch for sound of audio device.

3. When a microphone or guitar is connected, press ECHO/PITCH to enter echo/

pitch effect. Then, press the Next button on the tower repeatedly to increase

the echo level of the microphone/guitar or the pitch of sound of speaker.

1. In Bluetooth

mode, press the Previous button to go back to the previous

track.

2. When neither microphone nor guitar is connected, press ECHO/PITCH to

enter pitch effect. Then, press the Previous button on the tower repeatedly to

reduce the level of pitch for sound of audio device.

3. When a microphone or guitar is connected, press ECHO/PITCH to enter echo/

pitch effect. Then, press the Previous button on the tower repeatedly to reduce

the microphone/guitar's echo level or the speaker's sound pitch level.

Robotic Effect

Press the MALE/FEMALE/VOICE button repeatedly to activate the "robot" voice

effect, male robotic effect (MALE), female robotic effect (FEMALE) or no effect

(VOICE). On the remote, it is the M/F/V button.

Voice

Press the VOICE button on the remote to enter obbligato status. Press again to revert.