Grundig DOLBY ATMOS GSB 950 Manual Del Usuario página 22

CONNECTION
Dolby Atmos®
Dolby Atmos gives you amazing experience you
have never before by overhead sound, and all
the richness, clarity, and power of Dolby sound.
For using Dolby Atmos®
1
Dolby Atmos® is available only in HDMI
mode. For the details of the connection,
"HDMI CONNECTION".
please refer to
To use Dolby Atmos® in HDMI 1 and HDMI 2
mode, your TV has to support Dolby Atmos®.
2
Make sure that "No Encoding" is selected for
bitstream in the audio output of the connected
external device (e.g. Blu-ray DVD player, TV
etc.).
3
While entering Dolby Atmos / Dolby Digital
/ PCM format, the soundbar will show
DOLBY ATMOS / DOLBY AUDIO /
PCM AUDIO.
Tips:
▪
The full Dolby Atmos experience is only avail-
able when the Soundbar is connected to the
source via a HDMI 2.0 cable.
▪
The Soundbar will still function when con-
nected via other methods (such as a Digital
Optical cable) but these are unable to support
all of the Dolby features. Given this, our recom-
mendation is to connect via HDMI, in order to
ensure full Dolby support.
Demo mode:
In standby mode, Long press
-)
button on soundbar at the same time. The
soundbar will power on and demo sound can be
activated. The demo sound will play around 20
seconds.
Note:
1
When demo sound be activated, you can press
button to mute it.
2
If you want to listen the demo sound longer,
you can press
3 Press (VOL +) or
crease the demo sound volume level.
22 ENGLISH
----------------------------------------------------------------------------------------------------------------------
(VOL +) (VOL
and
to repeat the demo sound.
(VOL -) to increase or de-
4
Press button to exit demo mode and the unit
will go to standby mode.
HDMI Connection
Some 4K HDR TVs require the HDMI input or pic-
ture settings to be set for HDR content reception.
For further setup details on HDR display, please
refer to the instruction manual of your TV.
Using HDMI to connect the soundbar, AV equip-
ment and TV:
Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant
TV to your sound bar through a single HDMI
connection. To enjoy the ARC function, please
ensure your TV is both HDMI-CEC and ARC
compliant and set up accordingly. When
correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/- and
MUTE) of the sound bar.
▪
Connect the HDMI cable ( included ) from unit's
HDMI (ARC) socket to the HDMI (ARC) socket
on your ARC compliant TV. Then press the re-
mote control to select
Tips:
▪
Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to
On.
▪
The setting method of HDMI-CEC and ARC
may differ depending on the TV. For details
about ARC function, please refer to the own-
er's manual.
▪
Only HDMI 1.4 or higher version cable can
support the ARC function.
▪
Your TV digital sound output S/PDIF mode set-
ting must be PCM or Dolby Digital
Method 2: Standard HDMI
▪
If your TV is not HDMI ARC-compliant, connect
your soundbar to the TV through a standard
HDMI connection.
Use an HDMI cable (included) to connect the
HDMI OUT
soundbar's
IN socket.
HDMI ARC.
socket to the TV's HDMI