Self-Diagnostics SD-TE 220 El Manual Del Propietario página 26

EN
Electromagnetic Compatibility
Information
Table 3
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below. The
customer or the user of the device should assure that it is used in such an environment.
IMMUNITY test
Conducted
RF IEC
61000-4-6
Radiated RF
IEC 61000-4-3
26
Compliance
IEC 60601 test level
3 Vrms
150 kHz to 80 Mhz
3 V/m
80 MHz to 2.5 Ghz
Electromagnetic environment
level guidance
Portable and mobile RF communica-
tions equipment should be used no
closer to any part of the device, includ-
N/A
ing cables, than the recommended
separation distance calculated from
the equation applicable to the fre-
quency of the transmitter.
Recommended seperation distance
where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufac-
turer and d is the recommended sepa-
3 V/m
ration distance in metres (m).
Field strengths from fixed RF transmit-
ters, as determined by an electromag-
netic site survey, should be less than
the compliance level in each frequen-
cy range.
Interference may occur in the
vicinity of equipment marked
with the following symbol:
Infrared Ear Thermometer
80 MHz to 800 MHz
800 MHz to 2.5 Ghz