Assemble Grill - Coleman 9949A Serie Manual De Uso, Cuidado Y Ensamblaje

IMPORTANT: Remove all packing material prior to assembly/use.
Assemble Wheels and Towing Handle
■ Remove grill, wheels, handle, and regulator
from packaging.
■ Inspect all packing and remove all parts.
■ See carton for parts included with your unit.
■ Assemble wheels to grill
base. Attach each wheel
to axle using one bolt
and one washer. (Fig. 3,
Fig. 4)
Fig. 4
■ Press one hub cap into
each wheel (Fig. 5)
■ Insert towing handle into
bracket on grill stand.
(Fig. 6)
■ Press down button
on towing handle and
continue to push handle
in until it locks in first
hole on bracket. (Fig. 7)
■ Once handle is locked
in position, the grill can
easily be moved to any
location in your campsite
or backyard. (Fig. 8)

Assemble Grill

Fig. 3
NOTE:
Use wrench provided.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Set up the Grill
■ Place foot on plastic
towing handle, grasp
metal handle on grill and
lift until stand is fully
extended. (Fig. 9)
■ Continue to pull grill
handle toward you until
stand is fully extended.
(Fig. 10)
■ Lower grill and slide grill
back until leg extensions
lock into brackets on
bottom of grill stand.
(Fig. 11, Fig. 12, Fig. 13)
Install the Drip Tray
■ Install drip tray below rear
of grill. (Fig. 14)
English-6
Fig. 10
Fig. 11
Fig. 12
Fig. 9
Fig. 13
Fig. 14