Replacing The Filter-Bag - Termozeta SE50 Libro De Instrucciones

REPLACING THE FILTER-BAG

This operation must be performed with the appliance
turned off and the plug removed from the wall socket.
Replace the filter regularly to prevent loss of vacuuming
power and breakage of the bag because too full.
• Open the dust bag cover by pulling its handle (Fig. 4).
• To remove the filter bag, grasp the cardboard placed at the
base of the filter bag (13) and pull it up (Fig. 5).
• Insert the new filter bag by sliding the cardboard into the seat
in the filter bag compartment (Figure 6).
Important: for a correct mounting, follow the direction of
the arrow on the cardboard (Fig. 7).
• Close the cover (9) by first inserting its lower part and then
pressing on the top until it is correctly locked.
WARNING!
Make sure that the cover (9) IS FULLY CLOSED. If not,
repeat until when the cover is mounted correctly.
ENGLISH
Fig. 4
Fig. 5
Fig. 6
Fig. 7