Tools And Materials; Before You Begin - Kohler K-200 Guía De Instalación Y Cuidado

Important Safety Instructions (cont.)
Do not install this system if your water pressure exceeds 125 psi
(862 kPa). For water pressure between 80 psi (552 kPa) and 125
psi (862 kPa), you must install a pressure reducing valve to
regulate the pressure to <80 psi (552 kPa).
The filter cartridge must be replaced every 6 months or sooner.
Failure to replace the cartridge at the recommended intervals may
lead to reduced filter performance and failure of the filter.
If a booster pump is installed on your water system, you must
install an appropriate pressure relief valve. Inspect and maintain
the booster pump and attached pressure switch, and the pressure
relief valve, every 6 months or according to the manufacturer's
instructions.
If you are uncertain how to install and maintain any required
components for this system, contact a plumbing professional.

Tools and Materials

Phillips Adjustable
Screwdriver Wrench

Before You Begin

CAUTION: Risk of personal injury. Kohler K-200/K-201 is
intended for use in filtering potable water and has not been
evaluated for other uses. The product is installed at the point
of use and must be installed as specified in the installation
instruction by a qualified professional.
Observe all local plumbing and building codes.
Inspect the plumbing and supplies for damage. Replace or repair
as needed.
Kohler Co.
Plus:
• Adapter
• Thread Sealant Tape
3 1270310-2-A