Twin-Star International 70PF373 Manual De Instrucciones Adjunto página 3

Wood Mantel
A
E-2
Please read ALL "Electric Fireplace
Insert" instructions prior to installing
and removing Electric Insert in your
completed Fireplace Mantel. Install
the insert in your fireplace close to
its final position.
M
L
1. Locate the Wood Mantel (A) and set the
mantel on the floor back side down on a
scratch free surface, then unscrew Bolts
(L) and Washers (M) from the bottom.
2. Unscrews screws from the back of insert,
carefully lift and pull insert out from the
Q
back. Be careful to not slide the insert
against the mantel base which could
Screw
scratch the finish.
3. Carefully place Wood Mantel uprightly
as it stands.
1. Lift Electric Insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across base
as it may scratch your unit. Using a
Phillips Head Screw Driver, screw
screws (Q) through the pre-drilled holes
in the Electric Insert to the wood mantel.
2. Locate the Wood Mantel (A) and set the
mantel on the floor back side down on a
scratch free surface. Using Bolts (L) and
Washers (M) through the pre-drilled
holes with Phillips Head Screw Driver.
3. Carefully place Wood Mantel uprightly
as it stands.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 70PF373
Made in China
Printed in China
© 2007, Twin-Star International, Inc.
TO REMOVE INSERT
CAUTION: UNPLUG INSERT
FROM POWER SUPPLY
BEFORE MOVING.
TO INSTALL NEW INSERT
CAUTION: DO NOT PLUG
INSERT INTO POWER SUPPLY
UNTILL THE INSERT HAS BEEN
COMPLETELY INSTALLED AND
MANTEL MOVED INTO ITS
FINAL LOCATION.