DeWalt DXAEPI140 Manual De Instrucciones página 6

Ocultar thumbs Ver también para DXAEPI140:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Some products must be powered from a pure sine wave power source,
such as standard household power, or a "pure sine wave" inverter in
order to function properly.
Your product could be damaged by this inverter if it contains:
• Microwave ovens;
• Transformerless battery chargers
• Capacitive coupled power supplies
If an incompatible product is used with this inverter:
• The product might not operate at all, with no indication of failure. The
product fuse might open as a result of trying to use it with the inverter.
• The product might exhibit unusual operation (such as, intermittent
operation, buzzing, and the like.)
NOTE: Some laptop computers may not operate with this inverter.
WARNING: If the product does not operate normally, to
reduce the risk of injury or property damage, turn the product
off immediately and unplug it from the inverter.
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
DXAEPI140_ManualENSP_100716.indd 6
Components (Fig. 1)
Front
A. 12V DC accessory plug
B. Three-prong 120 volt AC
outlet (under protective
cover)
C. USB power ports (under
protective cover)
D. On/off button with bi-color
power/fault LED indicator
A
B
6
Back
E. Holes for attaching the
mounting clip
F. Mounting clip
G. Mounting clip screws
(2 pcs.) (KA3x10)
H. Mounting clip double-sided
tape (2 pcs.)
D
C
10/19/2016 3:59:37 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido