Set Flow Counting - Virtual Fence - One-Way Pass - Velleman IVSPROM1 Manual Del Usuario

Sysyteme de videosurveillance mobile intelegente
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Set flow counting – virtual fence – one-way pass
10.
Note: only available on the human detection camera.
Intelligent Video Surveillance (IVS) is the advanced application for motion detection, but more precise
and smarter. It can be applied to different situations with one of the following three modes: FLOW
COUNTING, VIRTUAL FENCE or ONE WAY PASS.
Note: All four camera channels support this function.
On the DVR, Right click to show the main menu, and select "
ADVANCE CONFIG
CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
DCCS
IVS
NOTIFY
EXIT
CAMERA
Select the camera channel that you want to use the IVS function.
IVS MODE
Select one of the following three modes depending on your environment:
MODE
FLOW COUNTING
VIRTUAL FENCE
ONE WAY PASS
DISPLAY LINE
Select to display the detection line for IVS on the screen or not.
SENSITIVITY
Set the sensitivity for IVS from 00 ~ 15. The larger the value, the more sensitive the IVS will be.
RESET COUNT
Click "SUBMIT" to reset the flow counting number to 0 when the IVS mode is set to "FLOW
COUNTING" and activated.
VIRTUAL FENCE AREA
Click "SETUP" to draw the detection line for IVS, and set the detection direction from left to right, or
right to left. This area setting is the detection base for IVS MODE.
SCENE CHANGE
Select "ON" to trigger a motion event when the camera is moved and the camera scene changes. At
the same time, the icon "
SCENE CHANGE SENSITIVITY
Set the detection sensitivity for "SCENE CHANGE" to "HIGH", "MIDDLE" or "LOW".
10.1 Flow counting
STEP 1: Go to "VIRTUAL FENCE AREA" to draw a detection line with your mouse, and decide the
detection direction by selecting "REVERSE".
09.11.2010
IVSPROM1
IVS1
CAMERA
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE SENSITIVITY
DESCRIPTION
A virtual detection line is set to detect the moving direction of
pedestrians for flow counting.
A virtual detection line is set to detect intruders crossing the
detection line, and an alarm will be triggered.
A virtual detection line is set to detect intruders from the specified
direction, and an alarm will be triggered.
" will also be shown on the screen in addition to the motion icon "
18
"
"ADVANCE CONFIG"
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE
"IVS".
".
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido