Connection Diagrams - Numark LIGHTWAVE Guia Del Usuario

User Guide (English)
Introduction
Box Contents
Lightwave
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Setup

Connection Diagrams

Items not listed under the Box Contents are sold separately.
Example 1: One Lightwave loudspeaker with vocal microphone and smartphone, tablet, etc.:
MIX
METER PULSE
MOOD PARTY
Connect a dynamic microphone to the Ch. 1
Microphone
Input using an XLR or 1/4" (6.35 mm) TRS
cable. Connect a smartphone, tablet, etc. to
the Ch. 2 Input using a 1/8" (3.5 mm) TRS
cable.
Note:
microphones with the Lightwave loudspeaker
rather than condenser microphones. If you
use a microphone that requires +48V of
phantom power, you must connect it to an
external phantom power supply. Lightwave
Smartphone,
does not supply any phantom power.
tablet, etc.
Power
2
We recommend using dynamic