Quick Start / Connection Diagram - Numark CDMIX USB Guia Del Usuario

User Guide (English)
Introduction
Box Contents

CDMix USB

Power Cable

User Guide

Safety & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit numark.com.
For additional product support, visit numark.com/support.

Quick Start / Connection Diagram

1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place CDMix USB in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
•
Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
•
Amplifiers
•
Mixer
•
Last, any input devices
Items not listed under the Box Contents are sold separately.
BOOTH
MONITORS
HOUSE
MONITORS
MP3 PLAYER
3
MICROPHONE
POWER