Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ELPMBPRH
Attaching to Projector Mount
1.
Orient projector with projector mount. (See Figure 5)
2.
Lift projector so that screws with thumb nuts are aligned with
mounting slots in projector mount base.
3.
Slide projector with adapter plate(s) into mounting slots in
projector mount base until screws are seated against the
back of mounting slots.
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
PROJECTOR FALLING, RESULTING IN SERIOUS
PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make
certain mounting slots in mount base slide under thumb
screws and that screws are seated in the back of slots.
(C)
(A)
2
(B)
(projector example)
Figure 5
4.
Verify that mounting screws are properly seated in mounting
slots in mount base.
5.
Move locking lever to "Locked" position. (See Figure 6)
6.
Insert key into lock and turn to secure projector to mount.
8
5
Figure 6
ADJUSTMENTS
YAW Adjustment
(See Figure 7)
1.
Loosen YAW adjustment locking screw using a #2 Phillips
screwdriver.
2.
Turn YAW micro-adjustment screw right or left using a #2
Phillips screwdriver until image is properly aligned on target.
3.
Tighten YAW adjustment locking screw using a #2 Phillips
screwdriver.
2
Figure 7
Installation Instructions
(projector example)
3
1
2
(projector example)
Publicidad
Tabla de contenido
