Philips AT891 Manual Del Usaurio página 14

English
14
3 Pull the shaving unit off the shaver.
4 Turn the lock anticlockwise (1) and remove the
retaining frame (2).
5 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and
a guard.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you accidentally
mix up the cutters and guards, it may take several
weeks before optimal shaving performance is restored.
- Remove the cutter from the shaving guard and
clean it with the brush.
- Clean the inside and outside of the shaving guard
with the brush.