Philips AT891 Manual Del Usaurio página 20

Ocultar thumbs Ver también para AT891:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
20
Problem
The shaver does
not work when I
press the on/off
button.
The shaver
does not work,
although it is
connected to the
mains.
Possible cause
Long hairs
obstruct the
shaving heads.
You have not
inserted the
shaving heads
properly.
The
rechargeable
battery is
empty.
The
temperature
of the shaver is
too high. In this
case, the shaver
does not work.
If the shaver
does not work
when you
press the on/
off button,
the battery is
empty.
Solution
Clean the shaving heads one by
one (see section 'Cleaning the
shaving unit with the cleaning
brush' in chapter 'Cleaning and
maintenance').
Make sure that the projections
of the shaving heads fit exactly
into the recesses (see section
'Cleaning the shaving unit with
the cleaning brush').
Recharge the battery (see
chapter 'Charging').
As soon as the temperature
of the shaver has dropped
sufficiently, you can switch on the
shaver again.
This shaver is not designed to be
used directly from the mains, so
you should recharge the battery
(see chapter 'Charging').

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

At751

Tabla de contenido